VME Processors Core Duo

Core Duo

The XVME-6200 is a powerful VMEbus PC compatible processor module from Xembedded, the pioneer and leader in VMEbus PC technology. The XVME-6200 VMEbus processor integrates an Intel® Core™ Duo or Core™ 2 Duo processor running in a range of 1.50GHz to 2.0 GHz with a PCI-to-VMEbus interface. This VME processor module allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software, operating systems and VMEbus I/O modules.
Core Duo


XVME-6200 Overview

The module incorporates the Intel® E7520 and 6300ESB chipset. On board memory is available for 512MB, 1GB, 2GB, 4GB and 8GB using ECC DDR2, 400MHz SDRAM (Dual Channel). Dual Ethernet 10/100/1000Mbps on the front panel which can be switched to the optional rear connector for Vita 31.1 or rear Ethernet support. Using a Compact PCI type switch module and Vita 31.1 chassis, for Vita 31.1 switched fabric, can provide dual XVME-6200 processor, fail over technology on the VMEbus.

For headless operation the XVME-6200 can be configured for “serial console mode”. The XVME-6200 can be configured for all rear I/O using a USB keyboard and mouse with the rear Video configuration.

The XVME-6200 has one PMC/XMC 32/64-bit 33/66MHz site (IEEE P1386/P1386.1) on-board with the option to expand to up to four additional PMC sites with the optional XVME-976-210/220 carrier board(s). The XVME-976-210/220 carrier board(s) occupies the adjacent VME slot(s) on the component side of the XVME-6200 and connects with a high speed mezzanine connector. XMC is PCIe x8.

XVME-6200 Features

  • Single Slot 6U single board computer
  • Intel® 1.66GHz Core™ Duo®, 2.0GHz Core Duo®, 1.5GHz Core™2 Duo processor with up to 4MB of level 2 cache, 667MHz FSB
  • Enhanced Intel® SpeedStep® to support operation at reduced speed and voltage
  • 512MB, 1GB, 2GB, 4GB and 8GB of ECC DDR2, 400MHz SDRAM Dual Channel
  • EIDE Ultra-100 DMA controller supports up to three EIDE devices (compatible with XVME-977 and XVME-979 storage modules)
  • Optional EIDE On-board 1.8” hard drive or optional Compact Flash carrier
  • Two Serial ATA150 (SATA150) external devices
  • Floppy disk interface (compatible with XVME-977 mass storage module)
  • Dual 10/100/1000Base T out front or Vita 31.1 on optional rear connector for in-rack Ethernet switch and fail over technology
  • One PMC/XMC 32/64-bit 33/66MHz site (IEEE P1386/P1386.1) with front panel I/O bezel and user I/O on optional P0 rear connector. XMC is PCIe x8
  • PMC expansion for two to four additional PMC/XMC sites using the XVME-976-210/220
  • E7520 and 6300ESB chipset
  • VGA Graphics out front panel or rear video support (Pixel resolution up to 1600X1200 at 85Hz)
  • Rear operation using USB keyboard/mouse and rear video options
  • VME-64 support with Tundra Universe IID A32/A24/A16/D64/D32/D16/D8, MBLT64 and fast hardware byte-swapping
  • Head-less (no keyboard, mouse or display) operation using serial console mode (jumper selectable) including BIOS setup
  • Parallel Printer Port (ECP, EPP and IEEE1284)
  • USB 2.0 Ports, two on front two, out rear connector
  • Three serial ports (BIOS selectable)
    • COM1 RS-232/422/485 on front
    • COM2 RS-232 out rear connector
    • COM3 RS-232 out rear connector
  • Long duration watchdog timer
  • Front panel reset switch and status LEDs
  • Audio - line level stereo input and output
  • Software support Libraries for Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, Linux®, QNX® and MS-DOS® ( others available on request)
  • Optional IEEE1101.10 (VME64x Compact PCI type) handles available at order time.
< Prev   Next >